Granulation line CCS/CGS 150-1250
Mixing, granulating and drying in combination
The granulation line CCS made by DIOSNA is an efficient production plant consisting of a mixer granulator and a fluid bed processor. The two parts of the line are directly connected to each other and provide best production results based on their optimum adaptation. The completely closed product transfer is the ideal precondition for container applications. The control via two control terminals facilitate handling of the plant for the operating and maintenance personnel. Because the two parts of the line can also be operated independently from each other, they remain flexible in their applications. In the CGS design (Compact Granulation System), additional advantages like low space requirements, increased productivity and yield of product.
- Advantages
- Advantages CGS
- Options
- Technical data
Advantages
- Perfectly adapted plants
- Low material loss thanks closed product transfer
- Through-the-wall concept for strict separation of production and technical area
- Automated processes and short set-up times
- Common operating interface for all plants
- Pressure-surge-resistant design up to 12 bar of the fluid bed proces
Advantages CGS
- Fast product transfer
- Optimised yield of product thanks reduced surfaces with product contact
- Decoupling for explosion prevention is not necessary
- Optimum accessibility of all components by means of an operator platform
- No lifting column required
Options
- Pressure-surge-resistant design up to 12 bar for the mixer granulator
- Top spray-/ tang-spray -/ Wurster processes in the fluid bed
- Containment design for highly active substances
- Comprehensive component program for handling and product preparation
- Qualification performance compatible with pharmaceutical guidelines
Technical data
- CCS/CGS 150
- CCS/CGS 300
- CCS/CGS 400
- CCS/CGS 600
- CCS/CGS 800
- CCS/CGS 1250
CCS/CGS 150
| Unit | Size | |
| Typical batch sizes 1) | kg | 25-75 |
| Dimension | Project-depending as well as depending on the design |
CCS/CGS 300
| Unit | Size | |
| Typical batch sizes 1) | kg | 40-130 |
| Dimension | Project-depending as well as depending on the design |
CCS/CGS 400
| Unit | Size | |
| Typical batch sizes 1) | kg | 79-190 |
| Dimension | Project-depending as well as depending on the design |
CCS/CGS 600
| Unit | Size | |
| Typical batch sizes 1) | kg | 90-280 |
| Dimension | Project-depending as well as depending on the design |
CCS/CGS 800
| Unit | Size | |
| Typical batch sizes 1) | kg | 120-360 |
| Dimension | Project-depending as well as depending on the design |
CCS/CGS 1250
| Unit | Size | |
| Typical batch sizes 1) | kg | 200-600 |
| Dimension | Project-depending as well as depending on the design |
1) Product- and process-depending
DIOSNA operates a policy of continuous product improvement and development and reserves the right to make technical changes. The specific contractual agreement is always decisive for the properties, capacities and condition promised for the DIOSNA products. We would be delighted to send you further information on request.
